What omniGRID does, how to get the free 1.1 update, and what the Gain knob actually changes.

omniGRID is Rapid Flow&apos;s 16-lane MIDI sequencer. You can record in real time, trigger Scenes while you play, transpose a sequence from incoming MIDI, set your own scales, change the playback direction, and shape repeats.
It is built for rolling grooves, basslines, and arpeggios. Euclidean patterns, scale-aware notes, and shuffle based on hardware clocks all sit on the same grid.
If you already own omniGRID, version 1.1 is a free update. There is no code for it. Log in at <a href="https://rapidflow.moonbase.sh">rapidflow.moonbase.sh</a> with the email you used when you bought it, and download the installer shown there.
The full description, and the price for a new purchase, are on the product page:
<a href="https://www.rapidflow.shop/products/omnigrid">omniGRID on rapidflow.shop</a>
<h2 id="the-gain-knob-does-not-change-the-volume">The Gain knob does not change the volume</h2>
Gain on omniGRID scales the velocity of the MIDI notes. It does not turn the instrument up or down.
A drum rack often gets louder when velocity goes up, so Gain can sound like a volume knob there. Many synths, including Drift, ignore velocity until you map velocity to volume inside the instrument. If Gain seems to do nothing, open the instrument and map velocity to the level, or to the control you want it to affect.

About omniGRID

omniGRID sends MIDI notes. The sound comes from a separate instrument.

omniGRID does not contain sounds. It sends MIDI notes to another instrument.
<ol>
<li>Put omniGRID on one track and your instrument on a second track.</li>
<li>Set the instrument&apos;s MIDI input to omniGRID itself. In Ableton that is the second menu under MIDI From, not Pre FX and not Post FX.</li>
<li>Turn monitoring on for the instrument track.</li>
<li>Press Play in the DAW, or press Play inside omniGRID.</li>
</ol>
In Bitwig and REAPER you can place omniGRID above the instrument on the same track.
If there is still no sound, check that the Note boxes match the instrument, that the lanes are not muted or soloed, and that Prob is not at zero. The Gain knob changes the velocity of the notes, not the instrument&apos;s volume. A drum rack often follows velocity. Many synths, including Drift, stay quiet until you map velocity to volume inside the instrument.

omniGRID makes no sound

That is expected. omniGRID is a MIDI effect, so it is not in the instrument menu.

omniGRID is a MIDI effect, so it appears under Effects or MIDI FX, in the Rapid Flow folder. It will not be in the instrument list.
<ul>
<li>Logic: the MIDI FX slot.</li>
<li>FL Studio: a Mixer insert. Not the Channel Rack.</li>
<li>Cubase and Studio One: an insert slot.</li>
</ul>
If it is missing entirely, rescan. In Studio One, reset the blocklist first. On a Mac, allow the plugin under Privacy &amp; Security if it was blocked, then scan again. Restart the computer if you have just reinstalled.

Why is omniGRID listed as an effect?

Set shuffle and every shift to zero first, then check that the instrument is not quantizing the notes.

Set Shuffle to 0%, or to the Accurate profile. Set the track shift, the master shift, and every per-step shift to 0 ms.
Then check the instrument that receives the notes. If it quantizes incoming MIDI, the grid and the sound will not match.
In Cubase, also turn off &quot;Suspend VST3 plugin processing when no audio signal is received&quot;.

The timing in omniGRID feels sloppy

Interval is the gap between repeats. Raise Reps above 1 or you only hear one note.

Interval sets the space between repeats. It does not create the repeats by itself.
Raise Reps above 1. With Reps at 1, a single note plays, whatever Interval is set to.

Changing Interval doesn't make an arpeggio

Pad presets store the 16 lanes. You can drag a clip out as MIDI. Import of a MIDI file is not available.

Pad presets save the notes and the names of all 16 lanes. The whole pattern is saved with the DAW project, and you can also save it as a plugin preset. Patterns can be copied from one omniGRID and pasted into another.
To randomize inside a key, turn Scale Quantize on, right-click the lane, and choose Randomize pattern.
There is no button that transposes every lane at once. Use the DAW&apos;s transpose. In Logic that is the Track Inspector, or the Transposer MIDI FX.
You can export MIDI by dragging the clip onto a track, or with Export MIDI, which saves a .mid file. omniGRID cannot import a MIDI file.
There are no drum sounds inside omniGRID. It needs a sampler or another instrument.

Can I save an omniGRID pattern or export MIDI?

Rapid Flow

omniGRID

About omniCLOCK

Does omniCLOCK support Song Position Pointer?

omniCLOCK isn't sending clock to my synth

I can't select a MIDI port in omniCLOCK

The Shift knob doesn't move my clips

My hardware drifts or plays at double speed

How do I set up omniCLOCK in my DAW?

omniCLOCK doesn't show up in my DAW

omniCLOCK

About Sphere V3

Sphere V3

About Zensphere V2

Zensphere makes no sound

I only see the light version of Zensphere

Zensphere doesn't show up in my DAW

Zensphere V2

About miniGRID

Why do the notes on miniGRID look an octave off?

miniGRID doesn't show up after I install it

How do I connect miniGRID to an instrument?

miniGRID won't load in FL Studio

miniGRID is on the track but nothing plays

miniGRID

About True AB

True AB

About drumGRID

drumGRID

About the Omega Bundle

Omega Bundle

Where do I download the latest version?

Where does Windows install the plugins?

Let's Go never opens a browser, or activation says Request timed out

Does my computer need AVX2?

My plugin is stuck on the activation screen

I can't find my license email

I can't find my FLOW Collective invitation

Do I have to be online to use the plugin?

Can I get a refund?

Can I check out without VAT?

Install and activation

Which Rapid Flow product should I get?

Choosing a product